WE KNOW. WE CONSTRUCT.
Plants |
Do|
We offer a complete solution for launching our own production in Europe and all over the world:
Technology and power
Produce up to 5,000 tons of charcoal briquettes, up to 15,000 tons of wood or torrefied briquettes, and 30,000 tons of pellets per year. For example, 20-25 m3 of bulk sawdust is needed to produce 1 ton of charcoal briquettes.
Equipment
Use iNOS GLOBAL's own European equipment to build and launch a production line.
All components have been tested for many years and are optimized for quick start-up and long-term operation. The quality is confirmed by certificates
All components have been tested for many years and are optimized for quick start-up and long-term operation. The quality is confirmed by certificates
Service
Cooperate with the INOS GLOBAL team at all stages of the plant start-up: we will advise on the production schedules of the start-up, ensure the supply of equipment, conduct installation supervision and commissioning, and assume warranty obligations
F|
Produce competitive products with high consumer demand:
Сharcoal briquette
Your factory's charcoal is both an energy-efficient solution and a more eco-friendly product than its counterparts
Wood briquette
Produce high-calorie briquettes using unique technologies
Torrefied briquette
Due to the torrefaction process, it is more calorific than wood briquettes: moisture evaporates, carbon, hydrogen and oxygen are released
Pellets
Fuel pellets are biofuels obtained from wood waste. It is in high demand in many production areas
Overview |
Get a visual view of your factory in 1 minute 10 seconds
Get answers to your questions from a representative in Irkutsk. Send a request and we will call you back today:
P|
The equipment is manufactured in Latvia, delivered on EXW Salaspils terms, and has a CE certificate
For charcoal briquettes
For wood briquettes
For torrefied briquettes
For pellets
P|
| Sieve | Sieve | 2 | Separation of large fractions of sawdust before drying (Hydrotreating) |
| Screw conveyor for feeding sawdust | 2 | ||
| Dosage Valve | 2 | ||
| Conveyor for removing large fractions into the container | 2 | ||
| Drying | Steel pipe 1 m in diameter, including calipers | 1 | Drying of sawdust by means of temperature and steam |
| Circulation Fan | 1 | ||
| Transport Fan with drying | 1 | ||
| Valve | 1 | ||
| Firebox | Movable grates, moving floor, hydroelectric station | 1 | Air Heating |
| firebox Pusher | 1 | ||
| 3 MGW Firebox | 1 | ||
| Ash Pusher | 1 | ||
| MIH chamber (concrete and brick) | 1 | ||
| Set of chimneys | 1 |
P|
| Pellet press | 1 | Pellet Press |
P|
P|
| Cyclone | 1 | Pressing sawdust into briquettes and sawing to size | |
| Mixer with screws | 1 | ||
| Briquette press | 2 | ||
| Cooling Line with tires | 2 | ||
| Gas exhaust Collector, fan and cyclone | 2 | ||
| Cutting moving saw with aspiration system and filter | 2 | ||
| Carriage for briquettes with tires | 10 |
P|
| Pyrolysis chamber with a heating chamber (battery) | 2 | Obtaining charcoal briquettes by pyrolysis | |
| Loading/unloading Station with a pusher and a screw | 2 | ||
| MIH Chamber with a "bridge" valve | 1 | ||
| Chimney with an arson function | 2 |
P|
| Stabilization chamber with additional heating chamber | 1 | Stabilization of charcoal briquettes | |
| loading/unloading Station with pusher and screw | 1 | ||
| Control System with valves and hatches | 1 |
C|
| General control system from the process control center (one PC and 2 screens) | 1 | Control system for drying, pressing, pyrolysis and stabilization and process control | |
| Control Panel with emergency button | 1 | ||
| Main power cabinets | 1 | ||
| Container for power cabinets | 1 |
T|
| Trolley for briquettes in the disassembled state (in the form of modules) | 100 | Moving briquettes from briquetting to pyrolysis and stabilization | |
| Caps for briquettes in the disassembled state (in the form of modules) | 20 |
| Trolley for briquettes in the disassembled state (in the form of modules) | 100 | Moving briquettes from briquetting |
W|
in 2021, INOS GLOBAL provides deliveries and related services for the launch of the plant in any region
Request a price list
fill out the form, please
Order a call
fill out the form, please
P|
Your factory will be exactly the same in 6 months:
Factory in Latvia
General view of the plant and equipment
INOS GLOBAL, LTD.
Rigas Street 115/A, Salaspilis, LV - 2169
Reg. No. 44103145044
EU ident. LV51ZZZ44103145044
Reg. No. 44103145044
EU ident. LV51ZZZ44103145044
Bank: Luminor Bamk AS Latvia branch
SWIFT: RIKOLV2X
Account: LV98RIKO0002930290935
SWIFT: RIKOLV2X
Account: LV98RIKO0002930290935
Ražotne
"Kokneses Osis", Koknese, Latvija
"Kokneses Osis", Koknese, Latvija